Integrated Anti-UAV System | Drone Detection & Neutralization

The Integrated Anti-UAV System is designed to detect, identify, track, and respond to unauthorized unmanned aerial vehicles (UAVs). By integrating radar detection, RF monitoring, EO/IR surveillance, electronic countermeasures, and laser-based neutralization, the system provides multi-layer aerial monitoring and protection.

With 360° airspace surveillance and integrated command and control, it is suitable for airports, critical infrastructure, perimeter protection, and other high-security facilities.

Two configurations are available to meet different operational requirements: System-I and System-II.

Integrated Anti-UAV System – Multi-Layer Drone Detection, Tracking and Neutralization Solution

Key Features

  • 360° Airspace Monitoring: Provides continuous aerial surveillance and target detection.

  • Multi-Sensor Detection: Integrates radar, RF monitoring, and EO/IR technologies.

  • Automatic Target Tracking: Supports target capture, identification, tracking, and radar-linked surveillance.

  • Electronic Countermeasures: Supports communication and navigation signal interference or deception.

  • Laser-Based Neutralization: Provides precision laser engagement against selected aerial targets.

  • Integrated Command and Control: Combines multiple detection and response modules into one coordinated system.

System Configurations

System-I

System-I integrates RF detection, Ku-band radar, EO/IR tracking, deception jamming, and laser-based neutralization.

1. RF Detection Module

Parameter Specification
Monitoring and Identification Frequency 20 MHz–6000 MHz
Direction-Finding Frequency 300 MHz–6000 MHz
Detection Range Greater than 10 km
Monitoring Bandwidth Greater than 120 MHz
Direction-Finding Accuracy Less than 2°
Panoramic RF Scanning Time Less than 3 seconds
Simultaneous Target Discovery More than 30 batches
Identification Accuracy Greater than 95%
False Alarm Rate Less than 2%
Protection Rating IP66
Weight Less than 25 kg

2. Radar Detection Module

Parameter Specification
Operating Band Ku-band
Detection Range Greater than 6 km
Azimuth Coverage 360°
Pitch Coverage Greater than 60°
Target Speed 1–150 m/s
Distance Accuracy Less than 5 m
Angular Accuracy Less than 0.3°
Simultaneous Target Capacity More than 500
Operating Temperature -40°C to +65°C
Protection Rating IP66
Data Interface UDP

3. EO/IR Surveillance Module

Parameter Specification
Visible Camera Resolution 2688 × 1520
Visible Lens 12.5–775 mm
Visible Tracking Range 5000 m
Visible Identification Range 3000 m
Thermal Detector Cooled MCT
Thermal Resolution 640 × 512
Thermal NETD 20 mK
Thermal Lens 90–1100 mm continuous zoom
Thermal Tracking Range 5000 m
Thermal Identification Range 3000 m
Horizontal Pan Speed 0.01–100°/s
Pitch Speed 0.01–80°/s
Weight Less than 110 kg

Thermal detection and identification distances are specified for a 0.3 m × 0.3 m UAV target.

4. Deception Jamming Module

Parameter Specification
Communication Link Interference Range 10 km
Navigation Link Interference/Deception Range 10 km
Operating Frequency 200–6000 MHz
Supported Navigation Signals GPS-L1CA, GLONASS-R1, BDS-BII, Galileo-E1
Power per Channel 50–100 W
Maximum Channels 13
Azimuth Coverage 0–360°
Elevation Coverage 0–70°
Response Time Less than 3 seconds
Dimensions Less than 950 × 500 × 1000 mm
Weight Less than 85 kg
Peak Power Consumption Less than 2500 W

5. Laser Neutralization Module

Parameter Specification
Laser Output Power 5 kW
Effective Damage Distance ≥800 m
Damage Time 9–15 seconds
Tracking Accuracy Less than 15 μrad RMS
Ranging Distance ≥1.5 km

System-II

System-II combines X-band radar, RF detection, EO/IR surveillance, and laser-based neutralization in an integrated configuration.

1. Radar Detection Module

Parameter Specification
Operating Frequency 10.4–10.6 GHz
Detection Range – DJI Phantom 4 ≥5 km
Detection Range – Personnel ≥8 km
Detection Range – Vehicles ≥10 km
Refresh Rate 2 seconds
Target Capacity ≥200
Target Speed 1–100 m/s
Azimuth Coverage 360°
Pitch Coverage -5° to +30°
Detection Altitude 800 m
RMS Azimuth/Pitch Accuracy Less than 0.4°
Distance Accuracy Less than 5 m
Data Interface UDP
Power Supply AC 220 V / 50 Hz
Operating Temperature -40°C to +55°C
Weight Less than 20 kg (excluding tripod)

2. EO/IR Surveillance Module

Parameter Specification
Visible Camera 2 MP HD CMOS
Visible Lens 8–500 mm
Visible Tracking Range Approximately 2000 m
Visible Identification Range ≥1500 m
Thermal Detector VOx, 640 × 512
Thermal Lens 31–155 mm
Thermal Optical Zoom 5×
Thermal Tracking Range ≥1000 m
Thermal Identification Range ≥800 m
Intelligent Analysis Computing 4T
Functions Hotspot alarm, intrusion detection, automatic tracking, target classification
Interfaces RJ45, ONVIF, RTSP, GB/T 28181
Power Supply DC 24 V ±10%
Average Power Consumption 150 W
Peak Power Consumption 350 W
Weight 42 kg

Thermal tracking and identification distances are specified for a 0.3 m × 0.3 m UAV target.

3. Laser Neutralization Module

Parameter Specification
Effective Damage Distance ≥600 m
Damage Time Less than 10 seconds
Target Identification Accuracy Greater than 95%
Tracking Accuracy Less than 15 μrad RMS
Continuous Emission Time Greater than 120 seconds
Horizontal Rotation Range -160° to +160°
Pitch Range -10° to +60°
Maximum Tracking Speed 60°/s

Applications

  • Airport airspace monitoring and drone protection

  • Critical infrastructure protection

  • Industrial facility and perimeter surveillance

  • High-value site protection

  • Restricted-area aerial monitoring

  • Integrated security monitoring projects

Integrated System Advantages

  • Multiple detection technologies for comprehensive aerial awareness.

  • Radar and EO/IR linkage for target tracking and visual confirmation.

  • Flexible system configurations for different site requirements.

  • Integrated detection, identification, tracking, and response functions.

  • Modular architecture for project-based integration.

OEM & ODM Customization

We provide project-oriented customization and integration services according to customer requirements, including system configuration, equipment integration, communication interfaces, installation solutions, and command-and-control system adaptation.

Frequently Asked Questions

Q1: What is the difference between System-I and System-II?

System-I integrates Ku-band radar, RF detection, EO/IR surveillance, deception jamming, and a 5 kW laser module. System-II uses X-band radar, EO/IR surveillance, and a laser module with a specified effective damage distance of at least 600 m.

Q2: Does the system support 360° monitoring?

Yes. Both configurations provide 360° azimuth surveillance capabilities through their respective detection and monitoring modules.

Q3: Can the system be customized for different sites?

Yes. System configuration, equipment integration, installation arrangements, and interfaces can be adapted to project requirements.

Q4: What environments are suitable for this system?

It is designed for applications such as airports, critical infrastructure, industrial facilities, and other sites requiring aerial monitoring and protection.

Request a Quote

Looking for an integrated anti-UAV solution for your facility or security project?

Contact us to discuss your detection range, site conditions, system configuration, and customization requirements. Our team can provide product information and project-based technical support.

оставить сообщение
Если вас заинтересовала наша продукция и вы хотите узнать более подробную информацию, оставьте сообщение здесь, и мы ответим вам как можно скорее.
Представлять на рассмотрение
Категории

Сопутствующие товары

Нужна помощь? Пообщайтесь с нами

оставить сообщение
For any request of information or technical support, fill in the form.All fields marked with an asterisk* are required.
Представлять на рассмотрение
Связаться с нами #
+86 15880201125

Наши часы работы

Дом

Продукция

Ватсап

Связаться с нами